Your Options In Concrete Resurfacing
There are a lot of people that are believing that the only solution to make your old discolored or cracked concrete surface to look more appealing is to remove and replace the concrete. But there are actually a number of options to makeover an old or discolored concrete than just tearing out the old concrete and install a new one. Read on to find out more here.
You should know first if the concrete surface can be resurfaced.
Before you consider doing something, you need to make sure first that the concrete can be resurfaced. There are no difficult steps in this process. All you have to do is to check if the concrete surface is still in good condition. If there will be some deep, widespread, or large cracks, or some damage or heaving from thaw/freeze conditions, or if the soils have started to settle, then the concrete will not be suitable for resurfacing. If you have no idea on what to do, then you should look for a concrete professional to check the concrete surface.
This article will provide you with the various options for concrete resurfacing.
Overlays – This type of concrete resurfacing has different kinds to produce so many different patterns. One of the choices are the stampable overlays that will copy how a natural stone or brick will appear. You can also choose the microtoppings that will produce a troweled textured or smooth finish. The self-leveling overlays that are thick and will produce a smooth even surface. If you are looking for a skid-resistant, textured, and very durable concrete surface, then you should choose the spray down overlays.
Staining – you will not only produce a concrete surface with a solid color. The stains will actually seep down into the concrete that is why you can produce a rich semitransparent color that can actually copy the look of polished marble or stained wood.
Decorative stencils – if you want to produce a stenciled concrete pattern on the concrete surface, you will need to place the stencil over the surface and apply a thin decorative coating. In order to produce the pattern that you are looking for, the stencil will show some parts of the concrete to the coating and will block the other parts.
Saw cutting – this method will let you create different patterns on your concrete surface. After the concrete is hardened, it will saw cut. The pattern will be stained after that in order to create a contrast with the concrete.
Engraving or etching – special tools are needed in order to create some designs into the concrete surface. This is not like the overlays because this is considered as a permanent surface treatment since you will be carving the surface with a pattern. You can do some striking or some staining after that.
Another thing that you need to know is that these companies also provide the service of snowplow curb damage repair in Vancouver.